Dupli-Color, Multi-Purpose Enamel, DA1672, Flat White Aerosol, 12 oz, 1 Can

Product Overview

Dupli-Color Multi-Purpose Enamel is a high-solids acrylic enamel coating in Flat White. The 12 oz aerosol is intended for general-purpose use on metal, wood, and fiberglass, including automotive and home projects. The manufacturer describes outstanding weatherability and adhesion, UV resistance, and coverage of approximately 12–15 square feet per can.

Specifications

• Brand: Dupli-Color
• Manufacturer part number: DA1672
• Product line: Multi-Purpose Enamel / Premium Enamel
• Color and finish: White, flat
• Formulation: Acrylic enamel
• Net contents: 12 oz aerosol can
• Sales unit: 1 can
• Approximate coverage: 12–15 sq. ft. per can

Intended Use and Application

For general-purpose coating of properly prepared metal, wood, or fiberglass surfaces. Remove loose paint, dirt, rust, grease, and wax; lightly sand and clean the surface before painting. Apply at 60–95°F (16–35°C) and low humidity. Hold the can parallel to the surface about 8–10 inches away and spray in even, sweeping passes. The manufacturer recommends two light coats followed by one medium wet coat, with 10 minutes between coats; apply coats within one hour. If more coats are needed after one hour, wait seven days. Allow the coating to dry and cure before handling or use.

Ordering Notes and Exclusions

This listing is for one DA1672 Flat White 12 oz aerosol can only. It is not a case pack, a gloss or semi-gloss white, an automotive OEM color-match paint, or a primer or clear coat. Check color and finish before ordering. Aerosol shipping is subject to carrier and jurisdiction restrictions.

Safety

Use only with adequate ventilation and follow the warnings and directions printed on the product label and current safety data sheet. Keep away from heat, sparks, open flames, and other ignition sources; do not puncture or incinerate the pressurized container, even when empty. Keep out of reach of children. Do not use this description as a substitute for the can label or SDS.

Canadian MPN / US search reference: Canadian part CDA1672 corresponds to the US reference DA1672. The C-prefix code (CDA167207) is the Canadian-market version and the E-prefix code is the US version of the same product; this listing covers both, so Canadian customers searching either part number should use this product.